The OLCT 100 receives a new infrared sensor
for refrigerants and SF6
Oldham launches a new infrared sensor for the OLCT 100 detector.
The OLCT 100 is a 4-20 mA analog gas transmitter designed for industrial applications in hazardous locations.
Oldham, a company within the 3M Group, Personal Safety Division, is pleased to announce the launch of a new infrared sensor for detection of refrigerant gases and SF6.
The applications for this new sensor are numerous and the markets for its use are global: Cooling industry (refrigeration and air-conditioning), Food industry, High and Medium Voltage switch protection, automotive industry, etc.
The new infrared sensor will provide a real advantage in terms of HFO fluid detection (hydro-fluoro-olefins) that are found in many applications, since it replaces the HFC (hydro-fluoro-carbons) that were formally used.
Although other technologies are reliable to detect HFO, it still requires a lot of maintenance. As it is necessary to test the detector after each gas exposure to check that it is functioning properly (for catalytic sensors). Furthermore, experience shows that it is impossible to prevent leaks from these machines, as there is often fifty ppm of HFO inside the filling machine housings, and that is close to the detectors. In these conditions, the detectors should be tested every day, which is a lot of maintenance and headaches for the production line operators.
Thanks to the infrared technology, this problem has been solved! The operating principle is based on the reduction of infrared radiation when gas is present. There is no chemical reaction or modification to the structure of the HFO molecule. The sensor is not damaged by the continuous presence of gas or over-exposures of gas.
The advantages are multiple:
- Reduced maintenance
- MTBF (mean time before failure) is 5 years
- No interference from CO2, C1 to C5 alkanes (methane, ethane, propane, butane, pentane) or from NH3
- Very stable even in case of variations in humidity level or temperature
For more information : http://gasdetection.3M.com
ABOUT 3M GAS & FLAME DETECTION
3M is comprised of former IST companies, Detcon, Oldham, Gas Measurement Instruments (GMI) and Simtronics, along with the gas and flame business of Scott Safety. The five legacy companies have come together to form one unified company with a unified vision for providing end-to-end solutions and the most comprehensive portfolio of gas and flame detection products in the many industries it serves.